FOUND HONDA TOOL FOR THE CRANK SHAFT NUT

[LOUD MOUSE]

A member contacted me about the clutch of these engines and as we talked I told him I didn't have a socket/tool to fit the crank nut and he gave me the HONDA Part Number <07716-0020203>.
Use it with a 1/2 in ratchet shaft.
Hope this helps others as it will me. ................lm

[Seadog]

A member contacted me about the clutch of these engines and as we talked I told him I didn't have a socket/tool to fit the crank nut and he gave me the HONDA Part Number <07716-0020203>.
Use it with a 1/2 in ratchet shaft.
Hope this helps others as it will me. ................lm

Good find and it’s a 26\30mm combination tool. It’s a bit expensive though. I’ve been using a 30mm Pit Posse PP2850 Swingarm Pivot Nut Tool, which costs la bit less.