honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

clutch will not disengage

Post Reply
morleyj
honda305.com Member
Posts: 1
Joined: Fri Jun 01, 2018 4:38 pm
Location: UPSTATE NEW YORK

clutch will not disengage

Post by morleyj » Fri Jun 01, 2018 4:47 pm

Hello folks. I am helping a friend make his ca77 roadworthy. Got the engine running and the carb dialed in. Right now I am stuck on the clutch not disengaging. The cable seems fine and is working the release mechanism but I can't get the clutch to disengage at all. I haven't done any barn restos that were this old and I am hoping that I won't have to pull the cover and manually clean the clutch. Any pointers from the pros out there?

User avatar
Seadog
honda305.com Member
Posts: 1272
Joined: Thu Dec 25, 2014 9:54 am
Location: Cape Cod, MA

Post by Seadog » Fri Jun 01, 2018 7:13 pm

Sorry Morley, pull the cover and clean the clutch plates. They stick.

OC305
honda305.com Member
Posts: 16
Joined: Sun Feb 26, 2012 3:04 am

Post by OC305 » Sat Jun 02, 2018 8:48 pm

My Ca 77 does the same thing get the motor running and warmed up then push it in neutral to about 2 mph then shift into first gear while keeping the clutch lever pulled in then shift to second and lug it down then pour the coals to it a few times, it should free up if not repeat. It will do this every time it sets awhile. I rode mine last season a hunderd miles one day and it has been fine since Pat

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home