Need help with this part number

Scram64 · Post by **Scram64** » Thu Jan 17, 2008 1:57 pm

Hey Guys, I have a Honda OEM 37 tooth Rear Sprocket with Part # 41201-268-810 written in marker. Anyone know model and year. Center hole is 2 & 15/16. Bolt holes are 3 & 1/8 apart and 4 & 3/8 across. The sprocket has a goove runinng around the bolt circle (maybe back side). Thanks in advance, Scram64

davomoto · Post by **davomoto** » Thu Jan 17, 2008 6:09 pm

Scram sounds like one of the optional rear sprockets for CB72/77s. The early -810 parts were optional, or race parts that Honda sold. The 268 center code is for CB72

Scram64 · Post by **Scram64** » Thu Jan 17, 2008 6:25 pm

davomoto wrote:Scram sounds like one of the optional rear sprockets for CB72/77s. The early -810 parts were optional, or race parts that Honda sold. The 268 center code is for CB72

Dave, what was the stock gearing for the CB72? Was it 14 / 35 ? I don't have a fiche for that model.

davomoto · Post by **davomoto** » Thu Jan 17, 2008 6:46 pm

15/32 is what I got from this site. Check it out when you get a chance. You have to use 1961 as the year to get CB72 fische.

davomoto

http://www.nielsens.com/fiche_select.as ... &year=1961