Barber Festival

malcolmgb · Post by **malcolmgb** » Sat Sep 24, 2016 4:33 pm

Is anyone planning to visit Barber Festival this year?

I will be there with a friend who is giving a talk about the British Motorcycle factory records held by the Vintage Motorcycle Club here in the UK.

We fly into Washington on the 2nd October and will drive down to Birmingham on the Wednesday stopping over in the the Maggie Valley area to visit the Wheels Through Time Museum on Thursday.

If anyone is going and would like to meet up that would be good.

flathead · Post by **flathead** » Mon Sep 26, 2016 6:58 am

We'll be in swap meet spots A11-12.

I'll have the reproduction CL72/77 fenders available, for both early and late models.

Stop by.

Mark

G-Man · Post by **G-Man** » Mon Sep 26, 2016 3:37 pm

Hi Mark

Could your tooling make an alloy front fender for CB72/77?

G

flathead wrote:We'll be in swap meet spots A11-12.

I'll have the reproduction CL72/77 fenders available, for both early and late models.

Stop by.

Mark

flathead · Post by **flathead** » Mon Sep 26, 2016 4:10 pm

I've had quite a few inquiries for the alloy fenders. When we were first setting up we tried one out of .024 3003 H-14, with poor success . The problem is our machine takes around 15 passes to get the proper radius. Check out the video below. H-14 work hardens pretty quick, so we got a lot of wrinkling and then tearing. I've got the tooling out right now to run a different fender for the Hummers and K Models. When we finish up this run, I'll tool back up for the CL's and experiment with some different alloys and hardness.

https://www.facebook.com/1607624962/vid ... =3&theater

malcolmgb · Post by **malcolmgb** » Tue Sep 27, 2016 4:43 pm

flathead wrote:We'll be in swap meet spots A11-12.

I'll have the reproduction CL72/77 fenders available, for both early and late models.

Stop by.

Mark

Will stop by and say hello Mark.

Tim Miller · Post by **Tim Miller** » Wed Sep 28, 2016 5:22 pm

We'll be at A28 with repro cl72/77 seat cover/foam kits. Also bringing hot rod Dream critter bike with 370cc, H&C roller cam, sandcast 750 carbs and the works. At less one restored cl72 for sale. I'll also have 3 cl72's with alloy tanks in the VJMC show. Looking forward to seeing ya'll.

Tim

malcolmgb wrote:Is anyone planning to visit Barber Festival this year?

I will be there with a friend who is giving a talk about the British Motorcycle factory records held by the Vintage Motorcycle Club here in the UK.

We fly into Washington on the 2nd October and will drive down to Birmingham on the Wednesday stopping over in the the Maggie Valley area to visit the Wheels Through Time Museum on Thursday.

If anyone is going and would like to meet up that would be good.

sixtiescycle · Post by **sixtiescycle** » Thu Sep 29, 2016 8:41 am

Tim Miller wrote:We'll be at A28 with repro cl72/77 seat cover/foam kits.

Foam kits? Tell me more about these!!!!

Honda305.com Forum

Barber Festival

Barber Festival

Re: Barber Festival

Re: Barber Festival