CB77 Grab handle bracket

JSharpPhoto · Post by **JSharpPhoto** » Thu Oct 17, 2013 11:29 am

I have a grab handle that mounts to the frame tube by the ignition, but I'm missing the back part that it bolts too. Is anyone holding?

I'll just make one if I can't find one.

e3steve · Post by **e3steve** » Thu Oct 17, 2013 2:29 pm

Your geographic location please. More members may be inclined to be helpful with said info.

If you fabricate the part it's worth bearing in mind that the clamped handle can twist on the frame tube, damaging the finish. An M6 x 15mm machine screw, drilled & tapped through the rear clamp and into the frame tube, will prevent the handle twisting.

Good luck in your task!

JSharpPhoto · Post by **JSharpPhoto** » Thu Oct 17, 2013 8:58 pm

Great tip on the fab idea.

I'm in Dallas tx incase anyone in the US has one.