Adjusting Valves and timing for my 67 CL77

[ksunflower1]

Just installed new timing chain and valves in my 67 CL77 put it back together and now am having trouble setting both. When the motor is set at the "F" the mark on the cam is at 4 o'clock instead of 6 o'clock, did I do something wrong when re-installing the valves? Why is the cam so far off?
First time tearing an engine apart so any and all help is appreciated.

[LOUD MOUSE]

Add your location to your profile. ........lm

Just installed new timing chain and valves in my 67 CL77 put it back together and now am having trouble setting both. When the motor is set at the "F" the mark on the cam is at 4 o'clock instead of 6 o'clock, did I do something wrong when re-installing the valves? Why is the cam so far off?
First time tearing an engine apart so any and all help is appreciated.

[ksunflower1]

Can anyone on the forum help me out? I don't want to tear my engine apart again if I don't have to.

[mobilyte]

since you dont seem to want to be patient, here's the answer you're looking for...

you put it back together wrong, aka you'll need to take it back apart.

[ksunflower1]

Whew...tough crowd. Never mind guys, I figured it out on my own. Didn't mean to ruffle feathers.
Just joined last month, first question today, ouch!

[LOUD MOUSE]

We are a more than friendly CROWD.
Ya were told the facts and if that is TOUGH then so be it.
Ya put the thing together wrong and ya need to fix it. ......lm

Whew...tough crowd. Never mind guys, I figured it out on my own. Didn't mean to ruffle feathers.
Just joined last month, first question today, ouch!

[ksunflower1]

Thank you both for the warm welcome to the forum.