hello and quick question

ardri59 · Post by **ardri59** » Thu Apr 14, 2011 5:04 pm

hi from ireland,i am starting to restore a cl77 but have a couple of problems,the bike is 1966 but the
front seat mount has been ground off along with the battery box,i want to know is the seat mount the hook type or covered in type as i have to try make it up from scratch
thanks
liam

Dana01 · Post by **Dana01** » Thu Apr 14, 2011 11:04 pm

Welcome to the forum Liam!

Please put your town/city in your profile. You'll get your answer here for sure.

FAST FRED · Post by **FAST FRED** » Fri Apr 15, 2011 1:23 am

liam my parts book says the seat change was at CL77-1033481. My 66 has the early seat with frame number CL77-1024184.

Fast Fred

ardri59 · Post by **ardri59** » Sat Apr 16, 2011 3:04 am

FAST FRED wrote:liam my parts book says the seat change was at CL77-1033481. My 66 has the early seat with frame number CL77-1024184.

hi,my frame number is CL77-1044811,Is there anyother changes on the frame that might
identify the seat type
thanks
liam

FAST FRED · Post by **FAST FRED** » Sat Apr 16, 2011 2:06 pm

Looking thru the parts book another clue might be that at the same frame number the CL77's started using the rubber mounted rear fender and the switch to late style exhust pipe with welded on muffler.

Fast Fred

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Apr 16, 2011 7:20 pm

Your bike was issued with the Rubber Front Mount. ..............lm

ardri59 wrote:
FAST FRED wrote:liam my parts book says the seat change was at CL77-1033481. My 66 has the early seat with frame number CL77-1024184.

hi,my frame number is CL77-1044811,Is there anyother changes on the frame that might
identify the seat type
thanks
liam

Snakeoil · Post by **Snakeoil** » Sun Apr 17, 2011 10:10 am

Unfortunately, the parts books, even the on-line fiche, show the older style seat bracket. If somebody has their seat off their late model, they might snap a picture for you and post it to this thread.

I just buttoned my bike back up yesterday or I would take a picture for you. I would think that somebody here has a bike with the seat off or a frame kicking around that they can shoot and post a pic.

Locational dimenions will be key in order for everything to properly align.

You are also going to need the rubber set setting (cushion) for the forward bracket. This piece mounts to the seat for a snug fit on the bracket. Not sure it is available as NOS. Part number is77101-273-300.

regards,
Rob

Honda305.com Forum

hello and quick question

hello and quick question

Seat Mount

Re: Seat Mount

More Clues

Re: Seat Mount