Name That Tool Bag

48lesco · Post by **48lesco** » Wed Mar 02, 2011 9:20 pm

What's this tool bag from? Says "Tappet Clearance .04mm." What old Honda used .04mm on the tappets? Seen 0.1mm on 305's and .05mm on smaller C100's etc, but .04mm? Any insight appreciated!

e3steve · Post by **e3steve** » Mon Mar 14, 2011 6:12 am

I can't state authoritatively, but Kirk shows this bag, in this post, as one for a CB160.

48lesco · Post by **48lesco** » Mon Mar 14, 2011 11:40 am

Right you are! or a CA160 or a CL160. - That's the good news. The bad news is that I don't own any of those bikes and still need a tool bag for my CA77. Don't get involved with these tools, the mysterious inconsistencies, rumors, black market trading etc. will consume all of your time. You won't care about how your bike runs or looks, you will just want your tool kit to be "correct." In the end, you'll realize that there was never a correct tool kit, and that they are like snowflakes - no two were ever the same. I think Kirk's excellent work is the closest that you can come to defining what's correct. Still want the correct tool bag for my Dream though...

jgregg · Post by **jgregg** » Mon Mar 14, 2011 8:14 pm

what are tool bags with tools going for? and can you find any?

48lesco · Post by **48lesco** » Tue Mar 15, 2011 9:24 am

You find tool sets on ebay, usually incomplete and or with incorrect tools. I've never run across a bag by itself. 89101-200-000 is the correct bag for the CA77, CA72, CA95, CB92, and C72. It has a 0.1mm tappet clearance stamp on it. So a tool kit with the right bag for any of these bikes would be correct for a 305 Dream.