has anyone used these bolts from rusty rider

tmp7905 · Post by **tmp7905** » Wed Jul 07, 2010 4:39 pm

http://stores.rustyriders.net/Detail.bo ... h=68577942

MBellRacing · Post by **MBellRacing** » Wed Jul 07, 2010 5:57 pm

I have. If they are the same set, it's not specific for any one part of the bike but more of an assortment that works in a number of places. It's nice that way and I've actually bought a couple sets so I can slowly replace all the Phillips heads with allens. The only place they won't work are where there's a countersunk screw.

davomoto · Post by **davomoto** » Wed Jul 07, 2010 8:41 pm

Great kit for general purpose. Try these guys for a kit specifically for the CB CL and CAs. Click on vintage parts, and then screw kits

http://www.mginproducts.com/screw%20kits.htm

versuspop · Post by **versuspop** » Thu Jul 08, 2010 1:32 pm

The longest bolt in the rusty riders set is too short to replace the long bolt in the oil filter cover. (i have one screw that is still a cross head on my bike....guess where)

goudreignet · Post by **goudreignet** » Sun Jul 18, 2010 3:45 am

hi, I have used Hexagon raised heads from inox fastners http://www.inoxgrp.co.uk the lenghts specified by the parts manual, inplace of the stock philipsheads, they also have a kit for the cb, but for some special bolts i have used http://www.phildentonengineering.com/ brilliant.

fred.nl

brewsky · Post by **brewsky** » Sun Jul 18, 2010 4:49 am

versuspop wrote:The longest bolt in the rusty riders set is too short to replace the long bolt in the oil filter cover. (i have one screw that is still a cross head on my bike....guess where)

You can get the long screw in socket style from http://www.mcmaster.com/#socket-cap-screws/=80fkn4
or http://www.stainlesscycle.com/catalog/i ... h=22_23_28
I've not found a phillips that long yet. (115mm)
Need to watch mixing suppliers, since the finishes don't always match.....some polished, some not, some knurled, some not etc.
I like the look of the phillips better and will go back to them if I find a set that includes the long one at a reasonable price.

Spargett · Post by **Spargett** » Sun Jul 18, 2010 9:42 pm

I purchased a set from rustyriders on eBay. While not entirely comprehensive, they worked out great.

You could also take the misc. bolts you need to replace, clearly label them and go to a hardware store to match up. My local Ace had just about everything I needed. Stock up on lots of extras while you're there. You never know when you'll need them.