1965 or so CL77 STOP LAMP SWITCH

jcspc · Post by **jcspc** » Mon Jul 05, 2010 1:58 pm

Looking for a rear brake stop lamp switch to replace the perfectly good one I ruined by tapping the brake shaft over so I could put the brake lever on. I used a 20 oz ball peen hammer to do this and in the process I bent the brass plunger to an obscene angle. Upon trying to straighten it back into place, I snapped it off therefore rendering it completely useless. So I know some kind soul in the 305 community has one of these laying around and needing to be put back into service. Please let me know what it will take for you to part with the part.

Sincerely feeling a little dumb,

jcspc

G-Man · Post by **G-Man** » Mon Jul 05, 2010 3:45 pm

Jcspc

If no one comes up with the goods I could repair it for you.

G

LOUD MOUSE · Post by **LOUD MOUSE** » Mon Jul 05, 2010 8:15 pm

Check your directory for a Tom Stockstill. .............lm

jcspc wrote:Looking for a rear brake stop lamp switch to replace the perfectly good one I ruined by tapping the brake shaft over so I could put the brake lever on. I used a 20 oz ball peen hammer to do this and in the process I bent the brass plunger to an obscene angle. Upon trying to straighten it back into place, I snapped it off therefore rendering it completely useless. So I know some kind soul in the 305 community has one of these laying around and needing to be put back into service. Please let me know what it will take for you to part with the part.

Sincerely feeling a little dumb,

jcspc

jcspc · Post by **jcspc** » Tue Jul 06, 2010 10:49 pm

For all of you who are looking at this post, I still haven't found the part yet. If you have one or know of one, I'm still interested...

Thanks,

jcspc

paperslammer · Post by **paperslammer** » Wed Jul 07, 2010 8:54 pm

This thing?
http://cgi.ebay.com/ebaymotors/Honda-Br ... 1744wt_939

gramey7 · Post by **gramey7** » Thu Jul 08, 2010 9:49 am

There are two styles of brake light switches; switch shaft is pulled out with a spring (like the one on EBay) or shaft is pushed in by a nylon button mounted on the rear brake spindle, like the one in the attached pic

jcspc · Post by **jcspc** » Thu Jul 08, 2010 9:54 am

The one in the pic is the one. Push in type.

gramey7 wrote:There are two styles of brake light switches; switch shaft is pulled out with a spring (like the one on EBay) or shaft is pushed in by a nylon button mounted on the rear brake spindle, like the one in the attached pic

Honda305.com Forum