adding blinkers/winkers

jensen · Post by **jensen** » Thu Apr 15, 2010 6:31 am

Hi Dave,

Looking at the pictures, I guess, the winkers at the rear, are the same as the asian CB72 / CB77 winkers. Do you have any pictures of the front winkers ? Are these attached with the 8 mm socket, as mentioned in an earlier mail , to the front light bolts ?

Jensen

davomoto · Post by **davomoto** » Thu Apr 15, 2010 9:44 am

Jensen, I don't have pics of the fronts, I will post is I find them. I don't know if the front bolts are 8mm, or if 8mm front winker bolts exist.

davomoto

jensen · Post by **jensen** » Thu Apr 15, 2010 10:12 am

Hi,

Found them myself,

Jensen

jensen · Post by **jensen** » Wed Apr 21, 2010 1:38 am

Hi Dave,

I found the 8 mm winker bolts and are taken care off,

Jensen

davomoto · Post by **davomoto** » Wed Apr 21, 2010 11:39 am

Thanks Jensen, and I am glad that I could hook you and Les up! He and John were great friends, and I'm sure you two can do a lot of trading of parts and info!

davomoto

LOUD MOUSE · Post by **LOUD MOUSE** » Wed Apr 21, 2010 9:14 pm

I see major parts design problems in the pic of the Scrambler.
Others take a good look at the pic and ya will see them.
U.S. or not it sure looks like a paste/transfer pic to me. ..............lm

jensen wrote:Hi,

Found them myself,

Jensen

jensen · Post by **jensen** » Thu Apr 22, 2010 4:01 am

LM,

The first picture is a 1:10 scale model of a domestic CL72. This scale model has winkers. Most scale models, especially from Japanese scale models factory's, are very good copy's of the original.

As there where existing CL72 with winkers, there should be wiring loom's for a CL72 with the winker wiring in it.

As I'm not into CL72 / CL77, I don't know if this winker wires are standard in all CL72 looms.
but if they weren't, there should be wiring harnesses out there with standard wiring in it.

Jensen