CL77 lower exh pipe

[davomoto]

I am in need of a lower exhaust pipe for a CL77. The upper has the muffler welded on, but I think the lower is the same . Decent condition or better, I really don't need a rusted out one. as I already have one. Will purchase or trade for CB/CL parts. What do you need?

davomoto

[FAST FRED]

DAVE, THERE ARE TWO DIFFERENT LOWER PIPES. THE EARLY PIPE HAS FOUR TABS FOR MOUNTING THE HEAT SHIELDS AND THE LATTER PIPE HAS FIVE. IF YOUR UPPER PIPE HAS THE MUFFLER WELDED TO IT ITS THE LATTER PIPE WITH FIVE TABS YOU NEED ALSO, I HEARD SOMEWHERE THE EARY PIPE HAS A SHARPER BEND AND DOES NOT FIT THE LATTER UPPER PIPE.

FAST FRED

[davomoto]

Thanks for the info Fred! I thought the only difference was the heat shield tabs.

Davo

[LOUD MOUSE]

The earlier pipe uses a totaly different rear mount. The early pipes fit to early and the last (late) fit each other but do to the rear mount they don't mix. The CL72 (250) left side pipe does have a bend which starts right at the exhaust exit where the CL77 has apx. 1 1/4 inch out to the bend. .............lm

DAVE, THERE ARE TWO DIFFERENT LOWER PIPES. THE EARLY PIPE HAS FOUR TABS FOR MOUNTING THE HEAT SHIELDS AND THE LATTER PIPE HAS FIVE. IF YOUR UPPER PIPE HAS THE MUFFLER WELDED TO IT ITS THE LATTER PIPE WITH FIVE TABS YOU NEED ALSO, I HEARD SOMEWHERE THE EARY PIPE HAS A SHARPER BEND AND DOES NOT FIT THE LATTER UPPER PIPE.

FAST FRED

[davomoto]

Ed, thanks once again for your expertise! It is as always, much appreciated!

Davo