WANTED - Early Style Crankcase Cover

[Seadog]

I'm searching for an early style CB77 right side crankcase cover, part no. 11330-268-020. The early style has a cast-in steel kick start bushing and a single semi-circular vent/drain hole in the bottom edge. See the photo below for a comparison; the early style is at the top. Many thanks to G-Man for the use of that photo.

[G-Man]

Seadog

I'll have a look for you. I know that I have one destined for my own 1962 project and a stack of broken ones from trades that I have made.

Incidentally, for reference, the bottom picture shows a NOS later cover in its original paint finish.

Good luck with the search

G

[Seadog]

Thanks, G. Something will turn up eventually.