honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Source for engine hoses

Post Reply
sstaylor
honda305.com Member
Posts: 22
Joined: Thu May 11, 2006 12:16 pm

Source for engine hoses

Post by sstaylor » Wed Jul 19, 2006 1:21 pm

All,

I am looking for suggestions on sources for replacement engine hoses. I need both fuel and vent hoses for my '68 CB77. Just wanted to ask before I ran down to the local auto parts chain. I'd also be interested in any recommendations as to the correct type of hose to use for specific application on this bike, beyond fuel line for fuel and vinyl for vent.

TIA,
Scott

rbaselt
honda305.com Member
Posts: 209
Joined: Sat Apr 08, 2006 7:24 pm
Location: Seal Beach, CA

Post by rbaselt » Thu Jul 20, 2006 7:09 pm

Scott,
Ohio Cycle has the correct fuel hose and tiny hose clips. I used black drip irrigation tubing from the local hardware store for the vent hose, it was a little tight fitting over the barbed connectors, but by soaking the ends in hot water it worked fine.
--Randall

sstaylor
honda305.com Member
Posts: 22
Joined: Thu May 11, 2006 12:16 pm

Line

Post by sstaylor » Fri Jul 21, 2006 12:26 pm

Randall,

Thanks for the info. I checked at Advance Auto and found fuel and vent lines that should work for me ($0.25 a ft). If not, I'll hit Ohio Cycle.

Scott

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home