Ca77 Air Filter cover

Geoff Hastings · Post by **Geoff Hastings** » Tue Mar 28, 2017 12:00 pm

Lots of the tin ware on this bike were missing including the air filter cover. I've seen a few for sale in the states for not a lot of money but the postage and duty tip the balance so I've made one. Problem I have is that from the photos I've used I can't see how the panel attaches to the frame, also, I've not yet bought the air filter so does it attach to the filter in some way.

Seadog · Post by **Seadog** » Tue Mar 28, 2017 1:28 pm

The cover is held in place by the tool tray. The air filter is held by an air filter mounting bolt (see http://www.classichondarestoration.com/ ... d_252.html). It passes through the filter from the right side. The head is captured by the rectifier mounting bracket. A 6mm nut pinches the filter. David Silver Spares has the filter and tube to the carburetor.

Geoff Hastings · Post by **Geoff Hastings** » Tue Mar 28, 2017 1:56 pm

Seadog wrote:The cover is held in place by the tool tray. The air filter is held by an air filter mounting bolt (see http://www.classichondarestoration.com/ ... d_252.html). It passes through the filter from the right side. The head is captured by the rectifier mounting bracket. A 6mm nut pinches the filter. David Silver Spares has the filter and tube to the carburetor.

Thanks sea dog,
I have the filter bolt and the tube but will need to get a filter. My next challenge will be to try and adapt a chain guard from another bike to fit the dream.