Lee's cl 77 (parts needed)

G-Man · Post by **G-Man** » Mon Oct 05, 2015 12:46 am

Looks like you have you own personal vintage Honda dealer.....:-)

G

NN7X wrote:Feeling like Christmas came early this year.
Sixtiescycles stopped by and we worked out a trade and a sale...feeling blessed to find so much so close.

Still have a few things to round up but need to give the budget time to recoup.
Have a couple emails out and waiting but all is good getting ready to send off stuff for blast and coat.
Thanks everyone.
Lee/NN7X

NN7X · Post by **NN7X** » Tue Oct 06, 2015 9:22 pm

Well ...didn't realize such a major part was missing.....

With a 104... frame number I think it's march-may of 67 frame....just a guess..
Any one have a late issue seat perch(my tech term)...
I do have some fab abilities so ,close up pictures and dimensions might work but one that needs repair would be awesome.
Lee/NN7X

OldScrambler · Post by **OldScrambler** » Wed Oct 07, 2015 4:38 pm

I have a junk frame with the '67 style seat mount. I could cut it off and send it with dimensions.
Are you sure your seat matches the single-clevis mount? Do you have the rubber cushion?

I've been away for a few days...........so still hunting down a few dyno-covers to send pics.

NN7X · Post by **NN7X** » Wed Oct 07, 2015 10:43 pm

Old Scrambler...I don't have a complete seat as yet..the one on the bike is in ok shape but the front mount was destroyed with a ton of cobbled welds for the rear...
Going to strip the fabric and foam and clean up the pan too.
Would like the proper front mount for this frame and will continue from there.
With the correct mount I can get the welding done on the frame and blast/power coat complete.
Lots of time so no hurry.
Thanks for the reply.
Lee/NN7X

NN7X · Post by **NN7X** » Sun Dec 06, 2015 9:49 pm

Thought I'd bump my very reduced parts want list one more time.
Still looking for the front seat mount that's missing from my frame...
Previous picture shows my frame and where the part should be
Was a frame on E...but ended and seller has not relisted..so am still in need.
Thanks all
Lee/NN7X

sixtiescycle · Post by **sixtiescycle** » Sun Dec 06, 2015 11:05 pm

NN7X wrote:Thought I'd bump my very reduced parts want list one more time.
Still looking for the front seat mount that's missing from my frame...
Previous picture shows my frame and where the part should be
Was a frame on E...but ended and seller has not relisted..so am still in need.
Thanks all
Lee/NN7X

Lee, as per our conversation last week I'm working on that ebay listing but have not heard back on it. I did notice it showed up as sold in the listings. Hopefully I can touch base with my co-worker this week as that may not be the only one the seller has.

NN7X · Post by **NN7X** » Mon Dec 07, 2015 9:59 pm

Thanks Dick..I hadn't noticed it as being sold...my bad
Lee/NN7X

Honda305.com Forum

Lee's cl 77 (parts needed)

Noob

frame part

Re: frame part