Mufflers?

Steverino · Post by **Steverino** » Fri May 08, 2015 11:42 am

Yes, I'm interested. I don't have a Dream but I love looking and listening to old Hondas. Please post the link.
Steve

brewsky · Post by **brewsky** » Sat May 09, 2015 6:10 am

Steverino wrote:Yes, I'm interested. I don't have a Dream but I love looking and listening to old Hondas. Please post the link.
Steve

Here's a link:
https://youtu.be/D4_nxam-nRo

G-Man · Post by **G-Man** » Sat May 09, 2015 8:08 am

Nice!

I like th A/F meter. Has that been useful?

G

brewsky · Post by **brewsky** » Sat May 09, 2015 8:35 am

G-Man wrote:Nice!

I like th A/F meter. Has that been useful?

G

G,

Yes, it has been very helpful, and I have used it on 3 different bikes so far.

It is most helpful in identifying which circuit needs tweaking under actual riding conditions, and saves multiple plug chops.

Not so necessary on completely stock intake and exhaust, since stock jetting in that case is usually best all for around conditions.

But when using aftermarket air filters and pipes, it has been a time saver.

G-Man · Post by **G-Man** » Sat May 09, 2015 8:55 am

Apologies for the stupid question but where do you have that plumbed in? A modified carb insulator?

G

brewsky · Post by **brewsky** » Sat May 09, 2015 4:02 pm

G-Man wrote:Apologies for the stupid question but where do you have that plumbed in? A modified carb insulator?

G

G,
The meter is connected to a controller which receives input from a wide band o2 sensor installed in the exhaust.

The controller has some limited memory, and can store readings for some period of time for later display on a PC etc. (I haven't used that capability yet)

The main drawback is you have to install a bung in the exhaust pipe or muffler within 30" of the exhaust port.

deafanddiabetic · Post by **deafanddiabetic** » Mon May 11, 2015 2:53 pm

Jims65CA77 wrote: ME TOO! These sound really good and "deep". I put the EMGO 80-84034 mufflers on mine. I bought them on Ebay for about $125 with shipping for the pair. You have to make sure you get the rear bolted on good so they don't move.

I actually could not figure out a way to attach my mufflers to the swingarm with the chain guards still on there so I sold the chain guards.

How did you attach yours??

Also, slice up a soda can and use those as buffers between the clamp and the muffler. You can't even see mine and they worked great!