starter rubber boot

[jleewebb]

Looking for rubber terminal boot for starter terminal...emphasis was on "old" in NOS one I put on a few years back, had to remove it the other day and it was crumbling. Found Honda part # for cable but not for just the boot.

I seem to recall a post about a Briggs and Stratton boot, maybe for spark plug, that would work, but can't find that either. Any help?

I'm gonna do another post on eventual solution to starter problem I posted about some time back, with a glowing recommendation for the folks who fixed it for me.

Thanks, Lee

[OldStan]

I think the briggs part was for the neutral light (that's what I used there.) The boot for the starter I got at Ohio Cycle http://www.ohiocycle.com/

[jleewebb]

thanks OS, I'm probably just disremembering it.

I think the one I had on it was from vendor you mentioned, it was given to me.

anybody else?

thanks, Lee

[48lesco]

NOS on ebay:

http://www.ebay.com/itm/NOS-Honda-305-4 ... a0&vxp=mtr

Seems like a lot for a 50-cent boot, but at least its a good picture of what it should look like.
-48

[cknight]

The original Honda part number is 32411-253-000, which is superceded to 32411-230-000. About $5.00 seem to be the going price. This can also be used as the cover where the battery cable attaches to the starter solenoid. Regards, Chase

[jleewebb]

Thanks Chase, that'll do the job...things go so much easier when you have the part number.

I actually scrolled through the list at Ohio Cycle and found the old pn...looks like new number is still a common Honda part. Local dealer would have to order it for me, but it seems to be somewhat available online.

So thanks to all who responded, I think I got it handled now. --Lee

[sarals]

How about the smaller rubber boots that fit over the terminals on the coils? I've had no luck finding part numbers for those.