Piston

mark1505 · Post by **mark1505** » Sun Feb 17, 2013 9:12 pm

Is there any other pistons for my 1967 CL77 other than 13102-275-020.
$80 bucks for one piston and $75 for rings is crazy.
My engine was stuck and I broke the skirt on one piston getting it lose.
I will need to bore the sleeves anyway to clean them up.
I have another complete engine from a CB305. Can I use the pistons and sleeves
in the CL?
I want to build the engine correct but $300 for 2 little pistons is HIGH.
Thanks
Mark

G-Man · Post by **G-Man** » Mon Feb 18, 2013 2:07 pm

Mark

If your spare is a CB77 (305) you should be fine to swap barrel and pistons.

Keep looking on eBay. Bargains do turn up especially if you buy individual pistons and not pairs.

G

Rickytic · Post by **Rickytic** » Tue Feb 19, 2013 1:13 pm

Mark,

Just my 2 Cents. Seems to me that you might want to get the sleeves cleaned up first to find out what size pistons you need. There is a set of pistons on Ebay currently. Go to Ebay motors, Honda 305 scrambler, and they should be there. Purchasing pistons before you know what you need might be a waste of your resources. Again, just my thought process. Good luck.

Rickytic