-
brcree
- honda305.com Member
- Posts: 78
- Joined: Fri Dec 30, 2011 7:24 pm
- Location: greenville S.C.
Post
by brcree » Sun Oct 28, 2012 9:55 pm
If anyone has had this situation please help. On trying to start my 69 305 a loud clacking / knocking sound can be heard........sometimes it starts...some times not. When it is running the sound isn't there......?????
In God we trust!.....Nothing like some breeze on the knees!
-
Cheburashka
- honda305.com Member
- Posts: 122
- Joined: Sun Feb 20, 2011 10:07 pm
- Location: Moses Lake, WA
Post
by Cheburashka » Sun Oct 28, 2012 9:58 pm
Accidentally left it in gear? I did that once. Made a nasty racket until it got going. I thought I had broken something in the bottom end.
-
brcree
- honda305.com Member
- Posts: 78
- Joined: Fri Dec 30, 2011 7:24 pm
- Location: greenville S.C.
Post
by brcree » Sun Oct 28, 2012 10:02 pm
Well Cheb.........no, it's in Nut. mate! At Least the rear wheel turns freely.
In God we trust!.....Nothing like some breeze on the knees!
-
Goodysnap
- honda305.com Member
- Posts: 456
- Joined: Mon Oct 06, 2008 7:25 pm
- Location: Lansing , Michigan
Post
by Goodysnap » Mon Oct 29, 2012 11:36 am
Does the noise occur only while cranking?More than likely the starter clutch slipping.
64' CB77
65' CB160
-
brcree
- honda305.com Member
- Posts: 78
- Joined: Fri Dec 30, 2011 7:24 pm
- Location: greenville S.C.
Post
by brcree » Mon Oct 29, 2012 12:14 pm
Yes Goody: just during starting...........runs while choke is on and stalls when I take the choke off........starter clutch.....is that a rebuild or a new clutch?
In God we trust!.....Nothing like some breeze on the knees!
-
brcree
- honda305.com Member
- Posts: 78
- Joined: Fri Dec 30, 2011 7:24 pm
- Location: greenville S.C.
Post
by brcree » Mon Oct 29, 2012 3:07 pm
OK Goody: I have the starter clutch looking at me......yes...some of the parts fell out! It looks like everything is there....if the little springs are weak would that cause it to slip as you said?
In God we trust!.....Nothing like some breeze on the knees!
-
Goodysnap
- honda305.com Member
- Posts: 456
- Joined: Mon Oct 06, 2008 7:25 pm
- Location: Lansing , Michigan
Post
by Goodysnap » Tue Oct 30, 2012 2:08 pm
I see you got your answer in the other post. Good Luck with it. Should correct the issue.
64' CB77
65' CB160