honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

float setting

Points Based Ignition | Electronic Ignition Upgrade
Post Reply
eddie
honda305.com Member
Posts: 4
Joined: Thu Jul 22, 2004 8:06 am
Location: Russellville, Ar 72801

float setting

Post by eddie » Tue Aug 10, 2004 7:14 am

How much gas will be in the bowl if the float is set right in the stock carbs of the CB77?

Lee
honda305.com Member
Posts: 13
Joined: Wed Dec 29, 2004 12:01 am

Re: float setting

Post by Lee » Wed Dec 29, 2004 12:38 am

eddie wrote:<br />How much gas will be in the bowl if the float is set right in the stock carbs of the CB77?<br />
<br /><br />First, turn the gas valve on, then off, then when you pull the float bowl off, put it at the same angle it is normally at; the top of the gas should be around 1/8&quot; inch below the top of the float bowl. This is not the official procedure, but should work fine, and thought this answer would be better than no answer.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home