Starter troubles

68Cb77 · Post by **68Cb77** » Fri Dec 09, 2011 6:41 pm

So I got the generator rotor off. All 3 bolts are broken that hold the starter gizmo to the rotor. 2 springs seem to be gone, there's 1 left, but it looks no good. 2 of the dogs (round parts) seem ok, one is not very round anymore..... Soooooooo........parts? anyone? I hear they are no longer available, maybe Ohio cycle?

I guess in short I need 3 bolts, 3 springs, and maybe a dog (round part) Thanks, John.

clhiller · Post by **clhiller** » Sat Dec 10, 2011 5:19 pm

Western Hills Honda is where I got my parts

48lesco · Post by **48lesco** » Sat Dec 10, 2011 6:38 pm

You'll need caps for the springs too - check the parts diagram. I would replace the knock pin also. Check with Honda first - all that stuff might still be available. If not Western Hills and Ohio Cycle are good options. Email me at swmrescue@cox.net if you don't have the parts manual, I'll send you a pdf (CB or CA)?

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Dec 10, 2011 10:50 pm

Pic 2 shows ya need that big part also as the part is missing the steel cover which covers the area of the rollers and holds them in place. .......................lm

68Cb77 wrote:So I got the generator rotor off. All 3 bolts are broken that hold the starter gizmo to the rotor. 2 springs seem to be gone, there's 1 left, but it looks no good. 2 of the dogs (round parts) seem ok, one is not very round anymore..... Soooooooo........parts? anyone? I hear they are no longer available, maybe Ohio cycle?

I guess in short I need 3 bolts, 3 springs, and maybe a dog (round part) Thanks, John.

68Cb77 · Post by **68Cb77** » Sun Dec 11, 2011 2:50 am

Thank you boys.....LM, I just realized today that I think that steel plate was stuck to the side of the other piece. I didn't even realize it was on there until I looked at the parts diagrams today, Thanks
48lesco...yeah, I figure I'll get all the little pieces as well. Ohio Cycle won't ship to Canada, weird, I guess it's a hassle. Got lots of stuff from Terry over the past few at Western Hills, he's great. and actually stopped in for a visit once on my way to Nashville. What a place!! he took me through the storage area upstairs...WOW..."here's 4 front fenders for a Scrambler",......and so on, and so on. Unreal! Thanks for the offer on the manual, it's a CB, I bought the manuals when I started on this one..
clhiller...good to meet you. Another Canuck.....getting damn cold today!

68Cb77 · Post by **68Cb77** » Mon Dec 12, 2011 4:04 pm

K, wow, I'm a bit of a dummy. All the parts are still available from Honda! I never checked because it seems there's not many parts left from Honda for these bikes. Maybe a bunch of other bikes share the same starter clutch?

48lesco · Post by **48lesco** » Mon Dec 12, 2011 8:27 pm

No dummies here - only those who have done it before!

Honda305.com Forum

Starter troubles

Starter troubles

Re: Starter troubles