..in classifieds
here. It's on offer to my Hondabrethren (whether Freemasons or not!) for a month or so, after which I'll stick it on eBay. I found a NOS sprocket (yes, a bit spendy!) a couple of months back -- but
what a find! -- before I started to pull the internals apart; it arrived yesterday. I'd already noted that there was a minute amount of play -- about a millimetre of circumferential movement -- on the old sprocket but, after stripping the cams out and closely inspecting it, took it to my local, respected marine engineer who peened the rivets with an air impactor fitted with a tiny 'witch's hat' anvil.
The weights' Neoprenes are present and correct, identical to those on the new sprocket (only present on about 270º of the stopper).
I shall start disposing of various parts that I don't need, as and when I get the time; if anyone needs anything specific, please PM me.
This Announcement is not intended as a tout (I don't need €40 that badly -- and the springs cost me €20 delivered, anyway); I'm just offering the part to possibly help out someone who may be in need during their rebuild.
