honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

WTB Upper Crankcase Cover CB77 S' Hawk

Looking for Bikes, Parts, Etc.? Post it here or try the New Honda305.com Auctions !!!
Post Reply
roadcapDen
honda305.com Member
Posts: 101
Joined: Tue Jan 04, 2011 11:20 am
Location: Halton Region, ON, CDA
Contact:

WTB Upper Crankcase Cover CB77 S' Hawk

Post by roadcapDen » Fri Feb 04, 2011 9:18 am

305'rs,
Looking for an Upper Crankcase Cover # 90706-268-000
Got one laying around, thought I'd try here 1st.
Also need a left side dust cover/sheild.
Thanks all,
Last edited by roadcapDen on Thu Feb 17, 2011 11:09 am, edited 1 time in total.
roadcapDen
2 HD XL's
65 Dream 305
and a bunch of other scoots

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: WTB Upper Crankcase Cover C78 Dream

Post by LOUD MOUSE » Fri Feb 04, 2011 10:42 am

The C78 engine/bike doesn't use that cover. .........lm


roadcapDen wrote:305'rs,
Looking for an Upper Crankcase Cover # 90706-268-000
Got one laying around, thought I'd try here 1st.
Also need a left side dust cover/sheild.
Thanks all,

roadcapDen
honda305.com Member
Posts: 101
Joined: Tue Jan 04, 2011 11:20 am
Location: Halton Region, ON, CDA
Contact:

Post by roadcapDen » Wed Feb 09, 2011 10:59 am

Thanks Ed but it's for my CB77E engine.
Part # 90706-268-010
roadcapDen
2 HD XL's
65 Dream 305
and a bunch of other scoots

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Wed Feb 09, 2011 6:57 pm

Got that now but look at the Subject Line at the top of your message. ..........lm

roadcapDen wrote:Thanks Ed but it's for my CB77E engine.
Part # 90706-268-010

roadcapDen
honda305.com Member
Posts: 101
Joined: Tue Jan 04, 2011 11:20 am
Location: Halton Region, ON, CDA
Contact:

Post by roadcapDen » Thu Feb 17, 2011 11:10 am

Changed subject line LM, Thx.
roadcapDen
2 HD XL's
65 Dream 305
and a bunch of other scoots

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Thu Feb 17, 2011 2:41 pm

Got it.
Hows the bike coming?. .......lm


roadcapDen wrote:Changed subject line LM, Thx.

roadcapDen
honda305.com Member
Posts: 101
Joined: Tue Jan 04, 2011 11:20 am
Location: Halton Region, ON, CDA
Contact:

Post by roadcapDen » Thu Feb 17, 2011 3:15 pm

Thx for asking, got the cylinder top off last night and the cylinder head and could see the cam chain master link down about 6 inches at the front of the engine, miracurosly got the clip and outside link off but there wasn't enough side play to get the link out, almost there but not enough. The link is at the bottom but got the chain out.

Stuck pistons were cleaned up a bit, now soaking in CLR, tried pounding w/ some wood but nothing yet. Gonna try some heat and try to make a pusher out of 1/4 steel plate to go over the studs...

The valves are stuck and the cam doesn't move, didn't see any recommendations in Mr Silvers CD???
Should they now move freely? I'm thinking yes?
roadcapDen
2 HD XL's
65 Dream 305
and a bunch of other scoots

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home