Centerstand stop?

eyhonda · Post by **eyhonda** » Fri Jul 02, 2010 6:54 pm

I have a cb77 and may change the exhaust to a CL exhaust. The question is how does the centerstand stop on the CL. On a CB, it stops on the muffler. But I will change to high CL exhaust and will no longer have a stop for the centerstand. Is the centerstand different and is it interchangeble?

LOUD MOUSE · Post by **LOUD MOUSE** » Fri Jul 02, 2010 7:06 pm

CL is totally different and ya will need to design a fix for sure.
Lots of the CB bikes had those pipes installed by owners but I never looked at that area. ..........lm

eyhonda wrote:I have a cb77 and may change the exhaust to a CL exhaust. The question is how does the centerstand stop on the CL. On a CB, it stops on the muffler. But I will change to high CL exhaust and will no longer have a stop for the centerstand. Is the centerstand different and is it interchangeble?

Goodysnap · Post by **Goodysnap** » Fri Jul 02, 2010 7:14 pm

I fabricated a stop for my center stand on mine. Using the original muffler mounting hole. I'll try to put up a picture of what I put together tomarrow. I've had no issues w/ it yet.

eyhonda · Post by **eyhonda** » Fri Jul 02, 2010 8:03 pm

Ok thanks. The smaller bikes (160, 175) used a stop on the stand near the pivot with a rubber disk that hit the frame when it was up. I was thinking somthing I can bolt to the frame or swingarm.

Goodysnap · Post by **Goodysnap** » Sat Jul 03, 2010 9:15 am

Not much really, just something I threw together with the welder. I used a carriage bolt on the other side in the same hole for the sidestand stop.

Honda305.com Forum

Centerstand stop?

Centerstand stop?

Re: Centerstand stop?

Fabed stop for center stand