Mounting position of the starter solenoid

Carl1951 · Post by **Carl1951** » Mon Oct 19, 2009 7:17 pm

Could someone with a CB77 post a picture of the starter solenoid (a/k/a starter magnet switch) mounted in the frame. Thanks.

Goodysnap · Post by **Goodysnap** » Mon Oct 19, 2009 7:58 pm

The starter solonoid does not mount to the frame. It actually mounts on a bracket on the bottom of the tool box. Sorry I dont have a pic for ya cus my bracket was gone and it was clamped to the frame w/ a hose clamp. You should find a pic somewhere here or look for a tool box on ebay and you'll see it. Brent

jleewebb · Post by **jleewebb** » Mon Oct 19, 2009 9:10 pm

this help? left side of bike...

Carl1951 · Post by **Carl1951** » Tue Oct 20, 2009 4:29 am

Thanks; there's a hole in the bottom of the tool box where it should be mounted (vibrations?), therefore, the previous owner bolted it to the frame; I knew it was incorrect. I've looked everywhere for a picture (shop manual, internet, etc.) or for another bike to look at (many CLs in the area, but no CBs). Once again, thanks to both of you.

Honda305.com Forum

Mounting position of the starter solenoid

Mounting position of the starter solenoid

solenoid mount