honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

im stuck during teardown. need cb77 flywheel puller

apophis
honda305.com Member
Posts: 62
Joined: Mon Sep 17, 2012 11:02 am
Location: Denver, Colorado

Post by apophis » Sun Jul 21, 2013 11:06 am

my local dealer had Yamabond 4. all good. I am almost back together. I did have a freakout point where I found an extra part during the reassembly of the stator side. I found an on oiler pin that looked like a dowel pin. since I already had the tranny in a was quite worried and could not find anything in an exploded parts view that matched. then by accident only i found it was part of the magneto section. some top of a spring inside that flywheel by the big roller pins. now I have no "extra" parts left. that was a relief

apophis
honda305.com Member
Posts: 62
Joined: Mon Sep 17, 2012 11:02 am
Location: Denver, Colorado

Post by apophis » Sun Jul 21, 2013 3:07 pm

back up and running. need to re-time the engine, but its alive again. shifts and seems fine so far. thanks for all the help along the way

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home