Honda305.com Forum

Is anyone familiar with the part numbering system for old honda parts? These don't have the normal 3 part Honda number. Obviously they are for a C200 but I was hoping to understand the numbering system. Thanks

Pic #1 shows a "CASE ELEMENT" which crosses to 17213-030-000
Pic #2 shows a "VALVE INLET" which crosses to 14711-030-000
Ya need the HONDA NPS CROSS REFERENCE TABLE to cross the numbers from the very first numbering system to today's. .......lm

Hahnda wrote:Is anyone familiar with the part numbering system for old honda parts? These don't have the normal 3 part Honda number. Obviously they are for a C200 but I was hoping to understand the numbering system. Thanks

Thanks Ed. With that info I was able to find and download that cross reference table.

There ya go. ...............lm

Hahnda wrote:Thanks Ed. With that info I was able to find and download that cross reference table.

It might take some studying to get it figured out. the center code is easy enough but the first 5 numbers seem a bit difficult to figure out.

OK I'm stuck. I can figure out the function part of the number and the center product number but I'm having a problem with the 3 digit component number.


I assume I'm using the cross reference that you are talking about?

http://www.cmsnl.com/classic-honda-fans ... s_text.pdf

I wasn't able to access the info ya sent.
Could be it is the same for all the parts that do the same application on the bike/engine along with other numbers to identify the bike/engine and the issue of that part. ............lm

Hahnda wrote:OK I'm stuck. I can figure out the function part of the number and the center product number but I'm having a problem with the 3 digit component number.


I assume I'm using the cross reference that you are talking about?

http://www.cmsnl.com/classic-honda-fans ... s_text.pdf