PPG Paint codes and Many Thank'sPPG Paint codes and Many Thank'sThank's guy for getting me hooked on old Honda's .Worked for a Honda shop as a kid , in the 60's Since I founed this forum and the help from Loud Mouse,Davomoto and mike mullen for the beer exchange for parts program ,have been a great help.I have been looking for an not found a PPG code for Paint colors,Know I came across it some where on this forum but just cann't find it.Thought I'd send along Some Pictures of some arrival over the last few months.Tom
paint codesI saved several notes on paint codes from forum in my archives, not sure who posted them, but for what it's worth I've cut and pasted them in here:
Honda had four colors for the CB77 Black White Red Blue, (and silver for fenders). LM's imron recommendations for reference: Bike silver is DuPont IMRON 45040U (Fenders and Side covers) Black is DuPont IMRON 99U. Red 6543UM Blue 63203UH Don't have a code for white (looks awful on the CB77) Been doing some legwork on bike colors for my project, and since PPG is a little easier to get in my area, I have been checking on crossing paint codes for Red and Silver. Red: EMO/LM likes Imron 6543UM, and this actually crosses to three different PPG codes, 71977, 71650, and 74359. The shop only had the chip for PPG 71650, and I compared it out in sunlight to the original part from my bike and it was a match, by all eyes in the area that saw it, including mine. The suggestion of Ditzler DPL71654K (from the Silver book?) crosses to PPG 71654, but it looked a little darker. It would probably look good on the bike, too, but I think the 71650 would be closer to stock. Side note -- I also compared the 71650 to some test shots I'd made using the Valspar Restoration Series Ford (tractor) red, and it is also very close match to this. So, if you want to get by a bit cheaper, the Valspar Resto Series is a good quality alkyd enamel, and it's available at Fleet Farm or Tractor Supply stores at about $8 a quart. Hardener is available, too. Hahnda has used this with great results on his Dream. Some will make the point that alkyd enamels are an older type of formulation, and won't hold up like the new urethanes, but it's still a great option depending on your budget. Guys on the tractor forums argue about this a lot! Silver: EMO's Imron 45040U crosses to PPG 33283, and while they didn't have a chip for this, the formulation is a very basic medium silver made up of black and silver flake, so should make a good match. Once again, FWIW, I checked with my PPG guy on the codes for the black and the blue. These are pretty generic numbers, and they cross to several codes, especially the black. Blue Imron 63203UH crosses to four different codes: 10419, 15958, 19126, and 19782. The main way to check these would be to check an original part against the paint chips, if they have them. The black Imron 99U crosses to many numbers, some of which aren't even black! The main PPG number it crosses to is PPG 120, a generic black. Check those chips! '62 CB77. "It's a rider."
color codesThanks!That is exactly what I was looking for.I'm across this a while back and didn't save it.I have to start filing this info it's worth it for the saved time .thanks again
that IMRON paint costs an arm and a leg now. The lady on line says they only use it for aircraft or something.
Who knows how reliable she is. I used much much much cheaper single stage paint and used LM's recommended paint method on my cruiser... worked really well. I think i'm going to paint my superhawk either blue or ivory with this method. '65 CB77
'66 CB450k0 '93 HD FXR
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
