Need: Tool Tray & Wire lead grommet- 1965 Dream

ensoniqdude · Post by **ensoniqdude** » Thu Jun 26, 2014 10:47 pm

Looking for a tool tray for a 1965 Dream.

Also need the grommet that fits into the air filter panel for the battery leads.

Hoosier Tom · Post by **Hoosier Tom** » Fri Jun 27, 2014 8:44 am

There were two different tool trays used depending when the bike was issued. The change occurred at serial (VIN or frame) number CA77-1010863 which I believe was in 1965. Stating the year of your bike when requesting parts can be rather ambiguous in certain cases as these bikes were titled in the year they were sold and can easily be a year off. Best bet is to reference your frame number when looking for parts and engine number when looking for motor parts.

HT

ensoniqdude · Post by **ensoniqdude** » Mon Jul 07, 2014 11:32 pm

Thanks for the tip.

I'll check my VIN and go from there.

Meanwhile, is there a source?

rrietman · Post by **rrietman** » Mon Jul 07, 2014 11:47 pm

good used is your only source. the tool trays are tough, really tough to get. they all rusted out. (corrosive environment) the grommet is easy, I think I have a few. let us know your vin# and I will see about that tool tray as well.
Randy