Parting Out 1966 CA77 - CLEAN!

[miscdebris]

Hey guys... I've been on this forum since I got my hands on a 66 CA77 because I thought it was really unique, but this is my first post. I got the bike as a basement find with the full intention to resto-mod it. Its been in dry storage/conditioned storage since 83' The bike has been completely disassembled. The engine has been rebuild with full new top end and new seals/gaskets from top to bottom. I've purchased several new parts again with the intent to restore, but another project has been consuming my time and I can't just let this clean example go to waste. The bike is very complete; however I've thrown away a handful of parts because they were just too far gone. Everything off the bike is available. I also have a clean title for the frame and the ultra rare hard saddle bags and rear luggage rack. Let me know what you need and make a reasonable offer. I live in north metro ATL, but will ship if buyer pays shipping.
I'll post some additional photos soon (complete engine, bags, rack, new spokes)

[miscdebris]

bump...most of the parts have been cleaned up and some even painted. I will most likely start adding parts to eBay, but thought I'd give this forum first right of refusal. **Rebuilt 305, saddle bags and rear luggage rack**. I've already received several PMs for parts. I don't expect most of the "good" parts will be available long. Name your part... everything has been very carefully disassembled, bagged and labeled. (headlight, bezel, ignition w/key, coil, wiring harness, triple, etc) rims are in 6 of 10 condition (rusty but straight). Seat has no tears and will clean up nicely.

Parts that are gone...
- R/L muffers
- throttle assy
- side kickstand
- Fork lock cover assy - pending

[Dr. Frankenstein]

Hi MiscDebris;

I am in need of / looking for a set of Dream 305 handlebars with the groove on the right-hand side for the throttle slide, and a set of Standard pistons; if you can help me out, please let me know!

Thanks!

-John

[Dr. Frankenstein]

Hi MiscDebris;

I am in need of / looking for a set of Dream 305 handlebars with the groove on the right-hand side for the throttle slide, and a set of Standard pistons; if you can help me out, please let me know!

Thanks!

-John

[Frank]

I m interested in the side bags. Do you have the mounting brackets? Thanks Frank

[miscdebris]

Hi MiscDebris;

I am in need of / looking for a set of Dream 305 handlebars with the groove on the right-hand side for the throttle slide, and a set of Standard pistons; if you can help me out, please let me know!

Thanks!

-John

John, do have the bars. They are straight and chrome is in great condition. I'll PM you some pics if you're still interested. I had a set of standard pistons, but they are now in the motor. Technically I guess I still have them, but will come with the motor attached. ha!

[miscdebris]

I m interested in the side bags. Do you have the mounting brackets? Thanks Frank

I was just looking for the brackets as I've had some other interest. Thought I had them, but can't seem to put my hands on em'. I'll keep looking.