honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Wtb parts for my 65 ca77

Looking for Bikes, Parts, Etc.? Post it here or try the New Honda305.com Auctions !!!
Post Reply
Iownyouto
honda305.com Member
Posts: 4
Joined: Mon Jun 13, 2011 12:48 am

Wtb parts for my 65 ca77

Post by Iownyouto » Wed Jun 15, 2011 1:10 am

Im looking for both front and back fenders (previous owner cut originals) carb bottom bowl, levers, alt cover and Ignition points cover. Let me know if you have any of these if not eBay it is then.

Wilf
honda305.com Member
Posts: 395
Joined: Thu Jan 22, 2009 10:32 am
Location: Gibsons, BC Canada

Post by Wilf » Wed Jun 15, 2011 8:06 am

I have a spare points cover and alternator cover...PM if you're interested.

Wilf
Last edited by Wilf on Wed Jun 15, 2011 9:12 am, edited 1 time in total.

OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Wed Jun 15, 2011 9:06 am

FYI, rear fender is part of the frame on these bikes. That said, there are usually frames on eBay, although shipping might be a pain.
63 CA78

mike1969
honda305.com Member
Posts: 720
Joined: Sat Feb 06, 2010 6:53 pm
Location: w.pa.

dream parts

Post by mike1969 » Wed Jun 15, 2011 9:29 am

The rear section of the Dream fender can be removed by drilling out the spot welds and can be replaced using small nuts and bolts or pop rivets. I did it on my 66 Dream.

Iownyouto
honda305.com Member
Posts: 4
Joined: Mon Jun 13, 2011 12:48 am

Post by Iownyouto » Wed Jun 15, 2011 9:29 am

I know it's a part of the frame but if you got a parts bike you can take a grinder to it.

OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Wed Jun 15, 2011 9:38 am

The rear section of the Dream fender can be removed by drilling out the spot welds and can be replaced using small nuts and bolts or pop rivets. I did it on my 66 Dream.
Good to know. My rear fender has a crack (normal I understand) that was poorly repaired. If I can't do a decent job of repairing the "repair" I might consider that route myself.
63 CA78

mike1969
honda305.com Member
Posts: 720
Joined: Sat Feb 06, 2010 6:53 pm
Location: w.pa.

parts

Post by mike1969 » Wed Jun 15, 2011 11:48 am

Stan,All of the spot welds are hidden behind the fender struts except the 2 on the top of the fender under the seat. I put 2 chrome bolts and nuts there even though they can't be seen with the seat on.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home