centerstand spring part

jakenok · Post by **jakenok** » Wed Oct 28, 2009 10:11 am

looking for the hook shaped part that attaches to the frame and has an attahment point for the centerstand spring. the hole where it attaches to the frame is worn out on mine.

rbaselt · Post by **rbaselt** » Sat Oct 31, 2009 8:42 am

I got one of those within the past year, it was either from Ohio Cycle or from emo. --Randall

cbxmountainman · Post by **cbxmountainman** » Sat Oct 31, 2009 3:04 pm

I have a NOS still in the wrapper from Honda. Make an offer. Add about $3.50 for shipping due to exhorbitant US Postal rates.

FAST FRED · Post by **FAST FRED** » Sat Oct 31, 2009 8:28 pm

JAKE, IF YOU THINK YOUR HOOK IS WORN OUT BECAUSE THE HOLE WHERE IT ATTACHES TO THE FRAME IS OBLONG OR FIGURE EIGHT SHAPED, IT IS NOT WORN OUT THATS THE WAY THEY ARE MADE. IF YOU GO ON LINE TO A HONDA SITE WHERE YOU CAN LOOK AT THE PARTS FICHE, LOOK AT THE PICTURE OF THE HOOK ON A CA77 OR CB125S (THEY SHOW THE BEST VIEW OF THE HOOK) YOU WILL SEE THE BOTTOM HOLE IS ROUND AND THE UPPER HOLE LOOKS ALL SCREWED UP. I MADE THE SAME ASSUMTION THAT MINE WAS WORN OUT, BUT AFTER LOOKING AT A BUNCH OF THEM I UNDERSTOOD IT THE WAY THEY ARE.

FAST FRED

Honda305.com Forum

honda305.com Forum

centerstand spring part

centerstand spring part

"C" Hook for CL77 Center Stand

CENTERSTAND HOOK