honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Tytronic electronic ignition help?

Charging System, Wiring, Lighting
danielzink
honda305.com Member
Posts: 105
Joined: Wed Jan 11, 2017 12:15 pm
Location: Lansing, MI

Re: Tytronic Electronic Ignition problems

Post by danielzink » Sun Jul 22, 2018 10:04 am

jdmachinist wrote:
David M. Lyon wrote:Here are the instructions I revised to install the TYTRONIC ignition kit.
Thank you for posting these instructions!

I installed a Tytronic Electronic Ignition on my 1965 CA77.... used the instructions supplied, not good but would get someone in the right direction.... i also used these which was a lot easier to understand.

After mounting and wiring everything up, it did not work :-(

Using a Test light to set timing, the light stays on the whole time. I was wondering if that was just a fluke, so i spun the motor and no spark at all.

Just messaged "Old_Honda" on Ebay. Going back to points for now so i can ride when the rain stops.

It is frustrating that i had to wait 2 weeks to get this from China then it was a bad one.

hopefully better luck next time.
Back on the first page of this thread...I tried 2 different modules and couldn't make either work on my CA77....

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home