starter button wire connection.

mike1969 · Post by **mike1969** » Sun Mar 06, 2011 9:27 am

I recently replaced the throttle cable on my Dream. When I took the assembly apart the yellow w/red stripe starter wire fell out. There is no sign of any solder or anyway to see how it was attached.

How do I attach the wire? Is it supposed to be soldered to the brass strip or attached to the screw?

brewsky · Post by **brewsky** » Sun Mar 06, 2011 10:36 am

It should be connected to a terminal which the starter button contacts to ground the wire. The terminal is insulated from everything else....it may still be in the housing

mike1969 · Post by **mike1969** » Sun Mar 06, 2011 11:52 am

Thanks Bruce,I'll take another look at it. Mike

mike1969 · Post by **mike1969** » Thu Mar 10, 2011 9:08 am

Finally got it figured out. I went to Bike Bandit website which showed where the wire had to be connected. They have a parts manual with blowups and parts # of all sections of Dreams.

If anyone needs the blow ups go to bike bandit and look up 1961 Honda ca77.

Honda305.com Forum

starter button wire connection.

starter button wire connection.

starter button

starter wire connection