Part Number Needed for Petcock Screws

[marcb9999]

Hello - Can someone give me the part number for the 3 petcock screws for my 1966 CA77

Thanks,

Marc

[LOUD MOUSE]

93500-06025 which is 6X25. ...............lm

Hello - Can someone give me the part number for the 3 petcock screws for my 1966 CA77

Thanks,

Marc

[Dogsbd]

Either the parts book is wrong on this or I've got a weird tank.

Measuring the one screw I managed to remove intact it was 5mm, so I picked up some 5mm .08 thread at Home Depot, still no good. Evidently they are actually 5mm JIS, I have some on order from McMaster-Carr and will report when I receive them.

[LOUD MOUSE]

Ya asked a question and I answered.
Near as I know almost all the screws are 6mm and only a few are JIS and these 3 are not them. ...........lm

Either the parts book is wrong on this or I've got a weird tank.

Measuring the one screw I managed to remove intact it was 5mm, so I picked up some 5mm .08 thread at Home Depot, still no good. Evidently they are actually 5mm JIS, I have some on order from McMaster-Carr and will report when I receive them.

[Dogsbd]

Actually I didn't ask, marcb9999 did. I am simply stating what I have on my bike.

And on my bike, the petcock screws are not 6mm.

[LOUD MOUSE]

Sorry bout that! What sort of washers were under them? As the CL72/77 valves are mounted with 2 screws I looked at the book/fiche and to my surprise the screws and washers are not shown. ..............lm

Actually I didn't ask, marcb9999 did. I am simply stating what I have on my bike.

And on my bike, the petcock screws are not 6mm.

[Dogsbd]

LOL, no problem LM!

There were some red washers made of some sort of fiber material, and they all came apart on disassembly.

My parts book dated Oct 20, 1968 shows 93500-06025 as you stated. My June 20, 1960 parts book shows part number JP524 (5x24).

My Dream is a 66 model, and it has the late tank with a seam so it "should" have what the later parts book calls for, the 6 x 25mm. But it doesn't, for what reason I have no idea.