Dream speedometer gear

Eljeef · Post by **Eljeef** » Wed Jul 28, 2010 9:28 pm

Not sure where to put this question. On the speedometer box there is a gasket. Mine has fallen apart. I can't find a reference to it in the Silver manual to get a part number. Has anyone had to deal with this? What did you do to remedy this problem? Thanks, Jeff H.

jensen · Post by **jensen** » Thu Jul 29, 2010 12:05 am

Hi,

the oil seal ?

Jensen

joeweir1 · Post by **joeweir1** » Thu Jul 29, 2010 3:54 pm

Joined: 28 Mar 2010
Posts: 51
Location: San Francisco, California
Posted: Fri Jul 09, 2010 10:27 am Post subject: use caulk

--------------------------------------------------------------------------------

Thats what rebuilders use, either white marine silicone or sikeflex, just make sure you mask the glass and remove the masking right away to get a really clean line

brewsky · Post by **brewsky** » Thu Jul 29, 2010 4:21 pm

If you mean the one between the trim ring and the headlight housing, I just cut one out of an old inner tube.

Eljeef · Post by **Eljeef** » Thu Jul 29, 2010 4:56 pm

Sorry, I didn't make that clear enough. I'm talking about the other end of the speedo cable down at the front wheel. As I took my tire and rim off, the gasket or seal on the gear housing (referred to as the speedo gear box in the Silver's info) broke apart. This is what I am trying to figure out. I'll try to post pictures later tonight. Jeff H.

jensen · Post by **jensen** » Fri Jul 30, 2010 12:50 pm

Hi,

there are two oil seals on the speedo gearbox, which one are you talking about ?

Jensen

LOUD MOUSE · Post by **LOUD MOUSE** » Fri Jul 30, 2010 2:32 pm

"other end of the speedo cable down at the front wheel". ...................lm

jensen wrote:Hi,

there are two oil seals on the speedo gearbox, which one are you talking about ?

Jensen