CA77 305 frame changes ?Dream Rear FenderYou can take a rear fender from any CA78 frame and it will have the same holes for the "luggage supports". CA77 have different holes.
LM is right (as always). You will be in for no small task. Take EVERYTHING apart on the rear fender, including the sheet metal under the fender that the bolts for the luggage support goes through. IIRC those spot welds might be a little bigger than a normal spot weld cutter. Best wishes on your project. New one here:
http://www.ebay.com/itm/NOS-Honda-Dream ... f4&vxp=mtr 66 dream, 78 cb750k, 02fz1, 09 wing
CA77 305 frame changes ?Oh Oh - trouble in paradise....
Fearing I might lose out on the OEM fender piece suggested in the previous post, I purchased it. I picked up the bike in Vancouver today only to find out that it is in fact a C78. The serial number (the correct one) is C78-1000136. Does this mean that the fender extension won't work on this bike? Also, Hoosier Tom indicated that the seat, tank and fender braces were incorrect - when I thought it was a CA77. If this is indeed a C78, are those pieces correct for that bike? Thanks in advance for any suggestions you might have. Cheers!
CA77 305 frame changes ?Randy,
Thank you kindly for the offer. I purchased the fender piece and it is winging its way to me soon. I will however keep you in mind as I often head south for visits to your wonderful state. I am actually over in Victoria, so I am probably to the west of you. Thank you for the offer. Cheers! CA77 305 frame changes ?Tom,
My apologies if I appeared to question your advice. I am an utter greenhorn at this and I truly appreciate the wisdom and experience of those such as you who are helping me muddle my way through. I do appreciate your kind and timely advice. What I thought I had didn't appear to be the case once I was able to take receipt of the bike. Again my apologies of I appeared unappreciative. It was never my intent to do so. Cheers! Canuckada
|