honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Tranny stuck in neutral

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
roaddog
honda305.com Member
Posts: 3
Joined: Sun Jun 12, 2011 8:40 pm
Location: Lakeville, Minnesota

Tranny stuck in neutral

Post by roaddog » Sun Jun 12, 2011 9:03 pm

I just purchased a 1966 Honda Dream CA77 305. I am a new member to this forum. I was riding the bike and downshifted from 2nd to 1st and the tranny became locked in neutral. I think the problem is the shifting forks. How can I inspect the shifting forks?

mike horvath
honda305.com Member
Posts: 209
Joined: Sat Apr 25, 2009 2:16 pm
Location: chino hills, ca.

shifting forks

Post by mike horvath » Sun Jun 12, 2011 11:48 pm

Dog,
Congratulations on your new purchase. By chance did you attempt to upshift the trans, say back to second when this occured? At any rate, to answer your question, the motor will need to be dropped, :( flipped over and the bottom case half separated for this inspection. As far as the "condition" of the forks and what constitutes a need to repair/replace can be determined here with uploaded images or it may be another obvious issue that has caused your trouble. There are a number of people here who will be a definite asset to you as well as the ability to "search" the forum for information. Some may suggest you purchase the Bill Silvers repair manual for your bike which is an excellent idea. Digital camera and notes are great tools too when doing any major repair for the not so savy. Get ready for some learnin' about this vintage machine you just bought!

Mike

roaddog
honda305.com Member
Posts: 3
Joined: Sun Jun 12, 2011 8:40 pm
Location: Lakeville, Minnesota

Tranny stuck in neutral

Post by roaddog » Mon Jun 13, 2011 9:14 am

Mike, , thanks for your reply. You were right, I was trying to go back to second gear when the tranny became locked in neutral. I was afraid that the motor will have to come out. I will pick-up a Bill Silvers manual and continue to post information on the work needed to be done as well as completed. This is a great forum with some invaluable information that has already became very useful. Thanks again for all your help. Dog

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home