pdphillips54 wrote:I tightened the spring inside the R/S cover so that I could align the two gears 0 marks. Once I let go, of course, the spring unwinds. On the outside of the R/S cover, I align the start shaft mark with the kick start lever mark. Now, to install the R/S cover, must I tighten the spring (pre-load), using the kick start lever, so that the inside gears have the 0 aligned (spring under tension) as I fit the R/S cover on the motor? That puts the kick start shaft/lever marks at about 12 o'clock. Thank for your help.
Kick start spring
Be sure to turn the KS shaft right to stop then do as you say. .................lm
Re: Kick start springHi,
I know this topic is old but i have the same problem.... Is there any pictures or videos that could help me!?! Thank you Bert
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||