12x2.2 Clutch Rod O-ring

nrpolo · Post by **nrpolo** » Fri Jul 26, 2013 9:01 pm

Put my cl77 engine together and can't find or understand the purpose of the o-ring that the clutch rod goes through. Does not seem to be in my gasket kit. What keeps it in place and where can I find one. Is there a substitute and what will happen if I omit it. Thanks

48lesco · Post by **48lesco** » Sat Jul 27, 2013 6:44 pm

It keeps oil from seeping through the main shaft into your clutch actuator on the right side. It goes in a groove in the main shaft. It's available from Honda.
-48

nrpolo · Post by **nrpolo** » Mon Jul 29, 2013 8:27 am

Thank you Sir. I will drive to town to get one.

nrpolo · Post by **nrpolo** » Mon Jul 29, 2013 8:28 am

Thank you Sir. I will drive to town to get one.

48lesco · Post by **48lesco** » Mon Jul 29, 2013 8:21 pm

If that o-ring is all you need, I have an extra one I can just mail you. Your dealer will probably have to order it anyway. PM me your address if you want it.
-48