is it that bad ?

[Bert96]

I took apart my cb77 yesterday and i found that i have not the rear axle collar(# 42620-268-000) on my rear hub.


It seem like the other owner rode the bike like that !?

Do i really need this spacer ?



Bert

[G-Man]

The collar transmits the clamping force from the wheel spindle through the centre race of the bearings. Without it there the force goes through the actual bearing surfaces and the bearings will wear very quickly. The bearings are not designed for excessive axioal load.

So, yes - it is an essential part.

G

I took apart my cb77 yesterday and i found that i have not the rear axle collar(# 42620-268-000) on my rear hub.


It seem like the other owner rode the bike like that !?

Do i really need this spacer ?



Bert

[Bert96]

I was afraid of this answer!


Thank you


Bert

[G-Man]

Bert

You're welcome. You might wand to check the bearings for axial (along the spindle) play. The damage may have already been done....

G

I was afraid of this answer!


Thank you


Bert

[Bert96]

I already bought new bearings for the front and rear. But now,my big problem is to find that part!

If someone got this part and want to sell it,let me know....



Thanks


Bert

[Seadog]

https://www.ebay.com/itm/Honda-CB77-305 ... Sw-31ae5~T

[Bert96]

Thats not the part i needed , i found ont this morning.

Bert