Honda305.com Forum

Hard to find good front rims for a CB77. Would rear rims from David Spares work with the front hub on a Superhawk if larger tires (3.00-3.25-18) were installed? Not interested in show quality, just a riding machine. Hubs appear to have same diameter, but rear hub 3 mm thicker. Spokes appear to be id...

Is it possible to remove the center tube from the lower cast yoke on a CB77 steering stem? The fine threads on the center tube were ruined during disassemble. I have a spare steering stem (33mm), but I have to use my original lower yoke with the 34.5mm I.D. holes to match front forks. I know this is...

Because I will only be using my scrambler on the back roads of Wisconsin, I would like to place a CB77 rear sprocket on my CL77. My CL77 has a DLS hub with the center measuring 3 1/4 inches across and 70 mm between bolt holes. I know from this forum that there are different rear sprocket sizes for t...

The drill holes appear to be 4mm. I used a 3/16 " drill bit. Don't have any metric bits.
Thanks for the comments.
Hank

Using an old/new CL72 baffle as an example, I made baffles for the straight pipes on my newly rebuilt CL77. I didn't like that muffler thing. 1"X3/4" adapters, a length of 3/4" copper tubing, and a 3/4" tube cap, were used to construct the baffles for approximately $10 apiece. The hex end of both ad...

LM-------I'll will have to check with my brother to see if he replaced some parts back in the '70's before placing the machine in "parts" storage. He might have replaced some exterior parts that were wrecked due to poor maintenance. Would it be reasonable to find Dream tappet covers on a Scrambler? ...

LM ---You seem to have a wealth of information on 305's. Maybe you would be able to date the manufacture year of my CL. The engine is VIN # CL77E-1031894 while the frame is labelled VIN# CL77-1031902. I would appreciate any information you could contribute to my project.