Honda305.com Forum

Would like to know the outcome of this after your phone call. eric manuel Call me at 830-895-0654 or give me your number and I'll talk you through the adjustment. ...........lm My name is Norman I picked up a cl-77 it had been sitting awhile, I did the usual things and got it running , I went to tim...

Update:: Replaced rectifier with one from Radio Shack. Here is the link to the one I got https://www.radioshack.com/products/50v-bridge-rectifier?variant=5717581317 . Easy fix but battery still not holding a charge. Cost me 5 bucks to determine my battery was bad. ( I suspected as much) Replaced bat...

So I went to Radio Shack and bought a bridge rectifier. Here is the link to the one I bought https://www.radioshack.com/products/50v-bridge-rectifier?variant=5717581317 . Wired it up using the harness from an old rectifier I had and plugged it in. Volts went up as I revved the engine. The question I...

Used the following link to test the rectifier/regulator http://www.oregonmotorcycleparts.com/FAQ.html According to this my rectifier/regulator is working... If I did it correctly. Really stumped now. Maybe my rectifier/regulator is functioning properly now and later when it is hot and under load it ...

This has me a little puzzled. Dies at red light when headlight on. turn headlight on it starts first kick. Battery showing 12 volts when checked. Also will not start using electric start, seems like not enough juice. Could this be my rectifier? Is there a way to test the rectifier? Thanks min advanc...

Hey guys,
anyone have any ideas on how to make the suspension a bit stiffer on my '64 CA77. I know that the soft suspension is what makes it a DREAM to ride. Feels like you're on a cloud. Would like tomato it a little stiffer.

Any thoughts appreciated.

ericmanuel

Thanks. As that part is pushed into the hole in the lower case I'd expect it to move out when the clutch cover is off. They all do it. ...............lm Is the shaft loose to the part toward the right end or the left?. ..............lm Here is a link to a video of it. Should be easier than me typing...