Honda305.com Forum

Thank you for the info, I put the carbs back together and adjusted the floats again to 22.5 mm using the old needles, and it is much better. It still starts without a choke. After the bike is warmed up it is not effected by the choke. I tried to find the needle jet. #16133-275-004. Nobody has them a...

Thank you for the reply, I have tried two keyster kits. The more I investigate, the more confused I am getting. Can't seem to get the same story twice. Where can I get two kits to properly rebuilt these carbs? I need a 130 main and 38. The engine is black with soot and the liquid gas is on the plugs...

Thanks for the information, I was just about to buy two. Any body know why I can't get my 305 carbs to run with the proper mixture? I have tried anything I can think of. The cl77 305 starts without a choke and the choke has no effect while the engine is running. Black scoot all over the exhaust. I h...

Thanks for the information, I was just about to buy two. Any body know why I can't get my 305 carbs to run with the proper mixture? I have tried anything I can think of. The cl77 305 starts without a choke and the choke has no effect while the engine is running. Black scoot all over the exhaust. I h...

It's the same cam. It will just fire on an empty cylinder. Thanks again, CFL

Thank you for the information. I can still fell a little raise on one side of the cam. Why? Thank you, CFL

Thank you for the reply. The lobs are set in the normal area about 100 and 200 degrees. Does my cl77 305 have the same points cam? If so, do the dual points open at the same time? Thank you for the help. Sincerely, CFL