honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Search found 7 matches

by Erik C
Fri Jun 01, 2012 11:13 pm
Forum: Motors - 247cc | 305cc | 337cc | 350cc
Topic: Oil Pump Removal on CA77?
Replies: 3
Views: 1859

-48, thanks for the advice. I skipped the post work Friday beverage and headed straight to my garage. Man, that thing hung up on the knock pins something fierce. I do have the parts manual, but due to how stuck in there it was - I thought I'd be better off checking with the forum before going at it....
by Erik C
Fri Jun 01, 2012 7:07 pm
Forum: Motors - 247cc | 305cc | 337cc | 350cc
Topic: Oil Pump Removal on CA77?
Replies: 3
Views: 1859

Oil Pump Removal on CA77?

I've a '66 CA77 and it looks like my seal/gasket for the oil pump is leaking. I've a new gasket set, and after looking at my manuals, this forum, and other online material - thought I could drain the oil, remove the six bolts on the pump and drop it right out. Well, it hanges up after about a 1/16" ...
by Erik C
Sat Mar 31, 2012 12:06 pm
Forum: Transmission
Topic: Broken clutch adjuster bolt?... thoughts on repair procedure
Replies: 8
Views: 5121

Instant follow up - and I was wrong and you're right. The case number is CA77E-213225, which if I'm reading my Bill Silver book correctly is a '62 engine. Thanks for getting me to go look at the number.
by Erik C
Sat Mar 31, 2012 11:53 am
Forum: Transmission
Topic: Broken clutch adjuster bolt?... thoughts on repair procedure
Replies: 8
Views: 5121

All I can tell you is that I was told CB77, and it had the right casting for my CA77. I did notice the right crank cover does not have an access hole (will with a rubber insert disk) that I have on the CA77. I'll look at the serial number and my "Silver" book to see if I can sort out what I've reall...
by Erik C
Sat Mar 31, 2012 11:31 am
Forum: Transmission
Topic: Broken clutch adjuster bolt?... thoughts on repair procedure
Replies: 8
Views: 5121

Thanks all for the helpful information and offers on replacements parts. I was extremely lucky and caught a local Craigslist posting for CB77 engine. A short drive and $47 later I've a lot of replacement parts for future use, including the little clutch adjuster casting that I had shattered. Last ni...
by Erik C
Tue Mar 27, 2012 10:37 pm
Forum: Transmission
Topic: Broken clutch adjuster bolt?... thoughts on repair procedure
Replies: 8
Views: 5121

RZGKANE - I really appreciate the feedback - and felt better about learning I had not created too huge an issue for myself. To make things more interesting - it looks like the right side crank cover had not been removed in decades. After a lot of penetrant and two nights of effort with an impact dri...
by Erik C
Sun Mar 25, 2012 7:27 pm
Forum: Transmission
Topic: Broken clutch adjuster bolt?... thoughts on repair procedure
Replies: 8
Views: 5121

Broken clutch adjuster bolt?... thoughts on repair procedure

Well, I just made a mistake that's going to cost me a bit of work - and am looking for any advice. I've a '66 CA77 that is in pretty good shape and just cresting 8,000 miles on the odometer (which i believe is accurate). I've dropped in the electronic points/ignition system which has been great. I h...




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home