Honda305.com Forum

The bike's running ok until the plugs foul. Once fouled, it won't idle and runs very poor. Any other suggestions I can try before I remove the heads?

No smoke from the exhaust, only from the overrun which I only noticed yesterday. Both the exhaust from the over run and the white on the spark plug were never seen until I over corrected the float to lean the bike out. By breathers, are you referring to the two connectors on the back side of the eng...

I'm assuming this issue would be in Bill Silver's Engine guide? If so, great because I don't have the other one. I'm pretty comfortable with opening up and working on everything on the bike besides the engine. If it is oil getting between the iron skull and the aluminum head casting, would I need to...

Roughly 5 months ago my 66 Honda dream began fouling spark plugs. Steps I've taken to correct the issue : - Read every post on this forum I could about fouled plugs, running rich, running lean, ect - Worked my way though Ed Moore's tune up guide a number of times. - Ensured points were cleaned and g...

I'm looking for a good (yet not terribly expensive) person/shop to fix several paint issues I've had. A few months ago, I sent my tank to a local body shop to get repainted. They completed some body work (Bondo) and shot it with paint. After taking the tank home and filling the tank with gas, the pa...

I realize this is posted outside the paint section, but I figured the post may get a few more views this way. I'm looking for a good (yet not terribly expensive) person/shop to fix several paint issues I've had. A few months ago, I sent my tank to a local body shop to get repainted. They completed s...

G-Man - Good to know because I just dropped them off at a local chrome shop who is doing them for $90 a panel.

Thanks for the feedback.

-Patrick