Honda305.com Forum

I have a couple things...first I have these buco bags that I cleaned up and don't really know where they are fastened as they were off the motor when I got it...does someone have some pics of the installed buco bags.... also...I am trying to jump the ignition switch as it has parts missing (the tria...

I need two of the triangular contacts that are in the ignition switch ...does someone have an old dissected ign switch that they could part with two of the copper triangular contacts within...

I have a 63 Honda Dream and I need an ignition switch or 2 of the copper switch connectors in the switch...I think I can get the existing switch working if I had two of those triangular contacts in the switch...would anyone know where to get hese parts...maybe someone has one that is defective I can...

Question for you guys that have some time in on these dreams....I just took the rear wheel off and want to grease the bearings...Is the bearing pressed in there or can you remove the seal and they come out to repack..Thanks JT

I have a CA 77 61 305 dream ...The ign switch had been opened and parts missing...As these are no longer available, I took the time to see if i could reassemle this one and make it work.....I think I can make this switch work if i had two of the copper contacts that are missing...Does any of you col...

Thanks for the help....I am going to remove it and see if it is working. This unit hasn't been started in over twenty years and I started it the other day...It had like a loud chain noise at start but it started and ran pretty good considering all I did was clean and gap the points..I also noticed t...

Thanks for the help....I am going to remove it and see if it is working