Honda305.com Forum

oversize one over, not sure if they go by .010 or .020, but rings and pistons are needed....thanks

what through me off was that there was NO sign of any springs, completely disintergrated apparently, very dry in there as well, now I have to take the sprocket out and clean the roller surface and I think I'll finish it by buffing it. Do they recommend grease in there after reassembly?

I get the starter clutch out and apart and do not understand why those little plungers are there, I thought springs would be behind them but no, so what is their purpose, I understand the rollers and ramp operation with the rollers engaging the clutch and runway on the starter sprocket, seems like t...

for a CA72 the complete unit, roller and mount, mounts to top of crankcast with two 6 MM bolts

I need the cam chain roller that sits on top of the crankcase secured by two 6 MM bolts....thanks

just to be sure here, I see the oil coming up the right front stud, getting the rocker spindle and crossing over to the intake spindle and getting the outside cam bearing on its way. My head gasket has an O ring on both sides of the head gasket for the front outside studs, but it looks like only the...

was the smoking rectified, I got the same thing on this Dream, teardown showed massive oil all over the head gasket, bad O ring seal I suspect, this bike sat for years and maybe a re torque would have prevented this problem, looking to see if this is somewhat common