Hi
Would just like to introduce myself to the forum and start with a simple question. I am Greg based in North East England. I have just acquired a CB77. There are engine/running issues that I need to sort but as a starting point there are no mirrors but noticed the fittings have different threads so please can someone tell me what size threads the mirrors are?
Thanks Greg
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Mirror thread size?
-
GregMcN
- honda305.com Member
- Posts: 236
- Joined: Tue Jul 04, 2017 3:34 pm
- Location: Richmond, North Yorkshire, UK
CB77 mirrors
Thanks G Man. I have one lever mount that is 7mm and the other is about 11mm so looks like neither of them are original!
Re: CB77 mirrors
Sounds like you might be measuring the inside dimeter of the threads, there.
Try an M8 bolt in the 7mm one.
G
Try an M8 bolt in the 7mm one.
G
GregMcN wrote:Thanks G Man. I have one lever mount that is 7mm and the other is about 11mm so looks like neither of them are original!
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
-
Merz64cb77
- honda305.com Member
- Posts: 154
- Joined: Mon May 08, 2017 7:42 pm
- Location: Mississauga, ON CAN
cb77 mirrors
Hi Greg
I have the exact same issue. The clutch perch is 10mm but the brake perch is 8mm. My hawk is also a 67'.
I purchased a perch from eBay but the threaded hole for the mirror had a sleeve in it. If you buy from eBay be sure to confirm the thread size.
If you re looking for new repro perches tim at classic honda restoration had a nice set of 8mm.
I have the exact same issue. The clutch perch is 10mm but the brake perch is 8mm. My hawk is also a 67'.
I purchased a perch from eBay but the threaded hole for the mirror had a sleeve in it. If you buy from eBay be sure to confirm the thread size.
If you re looking for new repro perches tim at classic honda restoration had a nice set of 8mm.